N38300 Programmable DC Power Supply
- Voltage up to 2250V, current up to 5100A, power up to 180kW
- Supporting master/slave parallel, extended power up to 1.8MW
- Voltage accuracy 0.05%F.S., current accuracy 0.1%F.S.
- Voltage and current sampling rate 500kHz, resolution 16 bits
- Power factor 0.99, efficiency up to 93%
- LAN port and RS232 interface as standard, GPIB, CAN, RS485 and USB as optional
- CC&CV priority function, CC, CV and CP mode
- Standard 19-inch 3U chassis
- Editable rise and fall slew rate for voltage and current
- Internal resistance simulation, SEQ function, voltage RAMP function
- Multiple protections: OCP, OVP, LVP, OTP, OPP
- Equipped with high-voltage isolation digital & analog, and monitoring interfaces
N35100 Series Bidirectional Programmable DC Power Supply
- Small size and high power density, integrating 2500W in 1U height and half 19-inch width chassis
- Voltage: 80V, Current: ±55A
- CC/CV priority
- Adjustable voltage and current slew rate
- CC, CV, CR and CP mode
- SEQ test, Charge/Discharge test supportable
- Multiple protection functions, OVP, UVP, OCP,OPP, OTP
- 3.2-inch HD color screen to display information
- LAN/RS232/RS485/CAN as standard
- Modbus-RTU/CAN open/SCPI standard protocol supportable
N36200 Series Wide Range Programmable DC Power Supply
- Ultra compact size,high power density
- Fast dynamic response time,voltage rise&fall time ≤10ms
- Voltage accuracy: 0.03%+0.02%F.S.
- Current accuracy: 0.1%+0.1%F.S.
- Support automotive waveform simulation test(optional)
- Support SEQ test, battery charging test, internal resistance simulation
- Support LAN/RS232/RS485/CAN communication control
- Support Modbus-RTU/SCPI/CANopen communication protocol
- Adjustable voltage/current slew rate
- CC&CV priority function
N3200 Series High Voltage Programmable DC Power Supply
- Voltage range: ±2.5kV/±5kV/±10kV
- Voltage/current resolution: 0.1V/0.1μA
- Voltage/current trip warning
- Low noise for high accuracy and sensitivity measurement
- OVP/OCP/OTP protection
- High voltage output terminal, analog programming interface and voltage/current monitoring interface
- LAN port and RS232 interface, supporting SCPI commands
N36600 Series Portable Wide Range Programmable DC Power Supply
- Output range: 200W/80V/8A,100W/80V/6A
- Net weight only 1.8kg, compact size, easy to carry
- Multiple protection: OCP/OVP/OTP
- Four-wire sense and external trigger
- Multiple communication interfaces: LAN/RS232/RS485
- Supporting SCPI and Modbus-RTU protocol
- Supporting 100-240V AC input
- Optional 4U chassis to integrate 8 channels DC power supply